memez
Administrateur

|
Le 2008-01-13 21:59:41
|
Voici, en provisoire, la préparation mécanique:
Engine:
- 460 bored 0.030
- Crank: Stock
- Piston : kheit black with 12 or 14 comp
- APR Head Studs & Bolts
- Stock head with a little work around the valve guides and eliminated casting flash.Intake valves 2.08 or 2.19" , Exhaust valves 1.65 or 1.76"
- Cam: crane , range 4200/7200, 256/266 @ 0.50, duration 292/302 and lift 0.583/0.603
- cam with 4 degrees advanced
- 1.7 roller rocker from crane
- intake manifold victor JR (4500)
- Holley 4500 dominator 1050 or 1150 cfm E85
- Mallory ignition, 38/40 degree timing
- headers: 48.3 mm
Transmission:
- C6 with 9 inch converter Hughes stall 4500
- Transbrake
Rear:
9" N case, 4.11, spool & 33 or 35 splines
Slicks Good Year 32/16/15
Car:
- Chassis: MRA-Chassis
-Real mustang Mach 1 1972
-2600 lbs
Le but est de passer la barre des 10 secondes,avec un low budget, en bref, de courir en 9.90 Super-Gas!

--- Edité par memez le 13-01-2008 à 22:27 ---
---------------------- http://mrachassis.com
MUSTANG RACERS ASSOCIATION
 |
|